Setup: I bought THX 789 for the massive output of idk 6W/32ohms, but whenever I try to use my Sundara/Modhouse Argon/HD600/Arya V2/...whatever, I cannot reach decent listening levels in terms of db without getting this scratching/hissing noise in the background ... I think it's distortion. (DAC I use: Geshelli labs - J2, set to max volume) Settings: With an XLR output, gain setting level at 2/3 and the volume knob set to 2-4 o'clock, hearing distortion from a 250-350$ THX amp shouldn't be a thing, should it? With somewhat hard to drive headphones, I'm not reaching 70db, but I can already hear this godforsaken noise on all tracks without a constant stream of sound. If you dare to up the volume past 4 o'clock, or past 12 on gain setting 3/3, this noise becomes so loud, it might as well be an additional instrument Music: The tracks I usually listen to involve so few instruments, that you don't have a constant stream of sound. (e.g. Creep - Lena Hall) I'd love to get some feedback!...
Jun 5, 2024
https://www.ebay.com.au/itm/BravoPro-TA4F-4-pin-Connector-for-Shure-Wireless-Systems-Black/303298557896
1 x 3.5mm Female TRS Connector
https://www.ebay.com.au/itm/3-5mm-1-8-Female-TRS-Connector-Stereo-Audio-Jack-Plug-Yongsheng-YS240/253298977219
3 x Breadboard cables (Any cable would do. The length of this is just perfect. Just remove the pin tip at both ends and you are ready to go) 1 x Tin Lead Rosin Core (Soldering Wire) 1 x 60W Solder (Higher Watt is not recommended) 1 x Heat Shrink Tube (The size and length will depend on your cable)